FAQ

Default solution folder, feel free to edit or delete it.

What is the precision of the X & Y axis?
The precision in the X & Y axis is 0.05mm (0.0019in). For example if making a vertical surface; the position of the blade on each subsequent layer is re...
Sat, 7 Sep, 2013 at 7:43 AM
Do you use a blade or laser?
In an attempt to reduce the capital cost of the machine it was decided at the conceptual stage to use blade technology instead of lasers. The Mcor Matrix 30...
Sat, 7 Sep, 2013 at 7:45 AM
What are your consumables?
The consumable can be broken down into paper, adhesive and blade. Paper: We developed the Matrix 300+ to use the lowest cost paper classified as 80gsm (gsm ...
Mon, 26 May, 2014 at 3:47 AM
How is the adhesive applied?
The Matrix 300+ has a patented adhesive dispensing system that deposits very small dots of adhesive onto the paper substrate. It applies the adhesive select...
Thu, 20 Feb, 2014 at 9:57 AM
What kind of post processing is required?
Parts straight from the machine, and after the weeding process do not require post processing.  However, if desired, parts can be post processed in a number...
Sun, 22 Jun, 2014 at 10:44 AM
Can you make colour parts?
Obviously as long as the paper conforms to the same properties as standard office paper, any colour can be achieved by changing the paper colour on a Matrix...
Mon, 26 May, 2014 at 10:34 AM
What are your preferred table specifications?
  Our preferred table specifications would be: Steel box section construction (50mm x 50mm x 3mm thick) Smooth countertop material (30-50mm...
Mon, 6 Jan, 2014 at 2:15 PM
What is the energy consumption of the 300+ and decibel level?
What is the energy consumption of the 300+ at standby? When the 300+ is in standby the energy consumed is approximately  Watts. What is t...
Fri, 13 Mar, 2015 at 2:36 PM
How to split a 3D model using Deskartes 3D Data Expert
This procedure was kindly provided by Geoff Hancock from DGS 3D. The Australian Mcor reseller.
Tue, 22 Jul, 2014 at 3:24 PM